Security System Alarm
The security system alarm activates when the trunk, hood, or doors are opened without the key, or remote transmitter, or keyless access system.
When the security system alarm activates
The horn sounds intermittently and all of the exterior lights flash.
To deactivate the security system alarm
Unlock the vehicle using the key, remote transmitter or keyless access remote. The system, along with the horn and flashing lights, is deactivated.
Security System Alarm
The security alarm continues for a maximum of two minutes until the security system deactivates.
Setting the security system alarm
The security system alarm automatically sets when the following conditions have been met: • The power mode is set to VEHICLE OFF (LOCK). • The hood and trunk are closed. • All doors are locked from outside with the key, remote transmitter or keyless access system.
When the security system alarm sets
The security system indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system is set.
To cancel the security system alarm
The security system is canceled when the vehicle is unlocked using the key or remote transmitter, or you grab either front door handle while carrying the keyless access remote. The security system indicator goes off at the same time.
Panic Mode
The PANIC button on the remote transmitter
If you press the PANIC button for approximately one second, the following will occur for about 30 seconds: • The horn sounds. • Some exterior lights flash.

Canceling panic mode
Press any button on the remote transmitter, or set the power mode to ON.
Security System Alarm
Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when: • Unlocking the door with the lock tab. • Opening the trunk with the trunk release or the emergency trunk opener. If the battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key, remote transmitter, or keyless access system. Do not attempt to alter this system or add another device to it.
See also:
Fuse Locations
If any electrical devices are not working, set
the power mode to VEHICLE OFF (LOCK)
and check to see if any applicable fuse is
blown.
Fuse locations are shown on the fuse box
cover. Locate the fu ...
Bluetooth® Hands Free Link®
Models with navigation system
For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.
Models without navigation system
Bluetoo ...
Turn Signals
The turn signals can be used when the power
mode is in ON.
One-touch turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal in ...
