Auxiliary Input Jack
Use the jack to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug.
- The audio system automatically switches to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode buttons. You can return to the AUX mode by pressing the AUX button. You cannot use the auxiliary input jack if you replace the audio system.
See also:
Turn Signals
The turn signals can be used when the power
mode is in ON.
One-touch turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal in ...
Precautions While Driving
In Rain
Avoid driving in deep water and on flooded roads. This can damage the engine,
driveline, or cause electrical component failure.
Other Precautions
If there is a strong impact with something ...
Phone Setup
To pair a cell phone (when there is no
phone paired to the system)
1. Press the PHONE button or the
button.
2.Rotate to select Yes,
then press .
3. Make sure your phone is in s ...
