Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.
Reactivating the audio system
1. Set the power mode to ON, and turn on the audio system.
- If you set the power mode to ACCESSORY, you will be requested to enter the audio security code. See step 3.
2. Press and hold the power button again for more than two seconds.
- The audio system is reactivated when the system’s control unit recognizes that the system is in your vehicle. If the control unit fails to recognize, ENTER CODE appears on the audio/ information screen.
3. Enter the audio security code using the preset buttons. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial number label in your owner’s manual kit. We recommend that you write down the serial number in this owner’s manual. Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code. You can find out about your serial number and security code from a dealer.
U.S. models
You can register the security code at Acura Owners (owners.acura.com.), and find information on how to retrieve the serial number and obtain the code at radio-navicode.acura.com.
See also:
Bluetooth® Hands Free Link®
Models with navigation system
For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.
Models without navigation system
Bluetoo ...
Emissions Testing
Testing of Readiness Codes
Your vehicle uses “readiness codes,” as part of its onboard self diagnostic
system.
Some states refer to these codes during testing to see if your vehicle's
emis ...
Tools
Types of Tools
Types of Tools ...