Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the
following
conditions have been met:
•
The power mode is in ON.
•
The headlight switch is off, or in 
.
•
The parking brake is released.
The lights remain on even if you set the parking brake. Setting the power mode
to
VEHICLE OFF turns off the daytime running lights.
The high beam headlights return to the original brightness once the headlight
switch is turned on.
See also:
Booster Seats
If a lap/shoulder seat belt cannot be used
properly, position the child in a booster seat in
a rear seating position. For the child's safety,
check that the child meets the booster seat
manufactur ...
Low Keyless Access Remote Signal Strength
The vehicle transmits radio waves to locate the keyless access remote when locking/ unlocking the doors, opening the trunk, or to start the engine. In the following cases, locking/unlocking the doors ...
Exterior Care
Dust off the vehicle body after you drive.
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a
painted surface can result in body rust. If you find a scratch, promptly r ...
