Fastening a Seat Belt

After adjusting a front seat to the proper position, and while sitting upright and well back in the seat:

1. Pull the seat belt out slowly.

1. Pull the seat belt out slowly.

2. Insert the latch plate into the buckle, then

2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure.

- Make sure that the belt is not twisted or caught on anything.

No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash.

Have a dealer check the belt as soon as possible.

Never insert any foreign objects into the buckle or retractor mechanism.

3. Position the lap part of the belt as low as

3. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal injuries.
4. If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.

WARNING

Improperly positioning the seat belts can cause serious injury or death in a crash.

Make sure all seat belts are properly positioned before driving.

To release the belt, push the red PRESS button then guide the belt by hand until it has retracted completely.

When exiting the vehicle, be sure the belt is out of the way and will not get caught by closing the door.

See also:

Help Features
• To hear general HFL information and help, say “Tutorial.” • Say “Hands free help” or “Help” any time to get help or hear a list of commands. Bluetooth® Wireless Technology The ...

Keyless Access Remote Reminder
Warning buzzers may sound from inside or/ and outside the vehicle to remind you that the keyless access remote is out of the vehicle. If the buzzer continues even after the remote is put back in ...

Checking the Clutch Fluid
The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the clutch fluid level is at or below the MIN mark, have a dealer inspect for leaks or an excessively worn ...