Multi-View Rear Camera

Acura ILX 2013-2020 Owner's Manual / Driving / Multi-View Rear Camera

About Your Multi-View Rear Camera

Models with navigation system

For models with the navigation system, see Navigation System Manual.

Models without navigation system

The audio/information screen can display your vehicle’s rear view. The display automatically changes to the rear view when the shift lever is moved to Multi-View Rear Camera Display Area .

Multi-View Rear Camera Display Area

You can view three different camera angles on the rearview display. Press the

You can view three different camera angles on the rearview display. Press the selector knob to switch the angle. If the last used viewing mode is Wide or Normal, the same mode is selected the next time you shift into was last used, Wide mode is selected. . If Top View was last used, Wide mode is selected.

About Your Multi-View Rear Camera

The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are. Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle. If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.

    See also:

    Interior Convenience Items
    Glove Box Pull the handle to open the glove box. You can lock the glove box with the built-in key. Glove Box WARNING An open glove box can cause serious injury to your passenger in a crash, ev ...

    Side Airbag Off Indicator
    If the side airbag off indicator comes on, have the passenger sit upright. A few seconds after the passenger is sitting properly, the side airbag will automatically be turned on, and the indicat ...

    Light Switches
    Rotating the light switch turns the lights  on and off, regardless of the power model setting. High beams Push the lever forward until you hear a click. Low beams When in high beams, pul ...