Setting the Clock
Clock
Models without navigation system
You can adjust the time in the clock display, with the power mode in ON.
1. Press the SETUP button.
2. Rotate to select Adjust Clock on the screen.
3. Press . Adjust Clock appears.
4. Rotate to select the item you want to adjust (12/24 hour mode, hour, minute). Then press .
5. Rotate to make the adjustment.
6. Press to enter your selection. The display returns to Adjust Clock. Repeat steps 4 to 6 to adjust other items.
7. To enter the selection, rotate and select Set, then press .
Clock
These indications are used to show how to operate the selector knob. Rotate to select. Press to enter.
Models with navigation system
The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
See also:
Rear License Plate Light Bulb
When replacing, use the following bulb.
Rear License Plate Light: 5 W
1. Remove the screw from the center of the fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a fl ...
If a Tire Goes Flat
Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake
gradually to reduce speed. Then, stop in a safe place. Replace the flat tire
with a
compact spar ...
Safe Driving
You can find many safety recommendations throughout this chapter, and
throughout this manual. ...