Adding Security with a Tether
A tether anchorage point is provided behind each rear seating position. A child seat that is installed with a seat belt and comes with a tether can use the tether for additional security.
1. Locate the appropriate tether anchorage point and lift the cover.
2. Raise the head restraint to its highest position, then route the tether strap through the head restraint legs. Make sure the strap is not twisted.
3. Secure the tether strap hook onto the anchor.
4. Tighten the tether strap as instructed by the child seat manufacturer.
Adding Security with a Tether
Since a tether can provide additional security to the lap/shoulder seat belt installation, we recommend using a tether whenever one is available.
See also:
If the Malfunction Indicator Lamp Comes On or Blinks
Reasons for indicator lamp to
come on or blink
• Comes on when there is a problem with the engine emissions control
system, or the fuel fill cap is missing, or loose.
• Blinks when engine mis ...
Receiving a Call
When there is an incoming call, an audible
notification sounds (if activated) and the
Incoming Call screen appears.
Press the button to answer
the call.
Press the button to decli ...
Emergency Trunk Opener
The trunk release lever allows you to open the
trunk from inside for your safety.
Slide the release lever in the direction of
the arrow.
Emergency Trunk Opener
Parents should decide if their ch ...