See also:

Phone Setup
To pair a cell phone (when there is no phone paired to the system) 1. Press the PHONE button or the   button. 2.Rotate   to select Yes, then press . 3. Make sure your phone is in s ...

Back-Up Light Bulbs
When replacing, use the following bulbs. Back-Up Light: 16 W 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2. Turn the socket to the left and remove it. ...

Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system. Always disconnect the negative (–) cable first, and reconnect it last. Battery WARNING The battery gives of ...