Inspecting and Changing Fuses
1.Set the power mode to VEHICLE OFF (LOCK). Turn headlights and all accessories off.
2.Remove the fuse box cover.
3. Check the large fuse in the engine compartment.
- If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
4. Inspect the small fuses in the engine compartment and the vehicle interior.
- If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system. Replace fuse with a spare fuse of the same specified amperage. Confirm the specified amperage using the charts on
There is a fuse puller on the back of the engine compartment fuse box cover.
See also:
Maximum Load Limit
The maximum load for your vehicle is 850 lbs (385 kg).
See Tire and Loading Information label attached to the driver's doorjamb.
This figure includes the total weight of all occupants, cargo, and ...
Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used
while driving.
...
Housing Locations
The side curtain airbags are located in the
ceiling above the side windows on both sides
of the vehicle.
...