Overheating

How to Handle Overheating

Overheating symptoms are as follows: • The temperature gauge needle is at the loses power.  mark or the engine suddenly loses power. • Steam or spray comes out of the engine compartment.

First thing to do

1. Immediately park the vehicle in a safe place.

2. Turn off all accessories and turn on the hazard warning lights.

 - No steam or spray present: Keep the engine running and open the hood.

 - Steam or spray is present: Turn off the engine and wait until it subsides. Then open the hood.

How to Handle Overheating

WARNING

Steam and spray from an overheated engine can seriously scald you. Do not open the hood if steam is coming out.

NOTICE

Continuing to drive with the temperature gauge needle at the engine. mark may damage the engine.

Next thing to do

1. Check that the cooling fan is operating and

1. Check that the cooling fan is operating and stop the engine once the temperature gauge needle comes down.

 - If the cooling fan is not operating, immediately stop the engine.

2. Once the engine has cooled down, inspect the coolant level and check the cooling system components for leaks.

 - If the coolant level in the reserve tank is low, add coolant until it reaches the MAX mark.

 - If there is no coolant in the reserve tank, check that the radiator is cool. Cover the radiator cap with a heavy cloth and open the cap. If necessary, add coolant up to the base of the filler neck, and put the cap back on.

Last thing to do

Once the engine has cooled sufficiently, restart it and check the temperature gauge. If the temperature gauge needle has gone down, resume driving. If it has not gone down, contact a dealer for repairs.

How to Handle Overheating

WARNING

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and radiator cool Reserve down before removing the radiator cap.

If the coolant is leaking, contact a dealer for repairs. Use water as an emergency/temporary measure only. Have a dealer flush the system with proper antifreeze as soon as possible.

    See also:

    Brake Assist System
    Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking. Brake assist system operation Press the brak ...

    Floor Mats
    The front floor mats hook over the floor anchors, which keep the mats from sliding forward. To remove the mats for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat ...

    Locking/Unlocking the Doors Using a Key
    Fully insert the key and turn it. Locking/Unlocking the Doors Using a Key When you lock the driver's door with a key, all the other doors lock at the same time. When unlocking, the driver's door ...