Parking/Side Marker Light Bulbs
When replacing, use the following bulbs.
Parking/Side Marker Light: 5 W
Turn the steering wheel and pull the inner fender back in the same way as when replacing the front turn signal light bulbs.
1. Push the tab to remove the coupler.
2.Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.
4. Insert the coupler into the connector of the bulb.
See also:
Maintenance Minder TM
If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear the multi-information display every time you set the power mode to ON. The messages notify you when to ch ...
Starting the Engine
1. Make sure the parking brake is applied.
Automatic transmission models
2. Check that the shift lever is in
, then
depress the brake pedal.
- Although it is possible to start the vehic ...
VSA® (Vehicle Stability Assist), aka ESC(Electronic Stability Control),
System
VSA® helps to stabilize the vehicle during cornering if the vehicle turns
more or less
than what was intended. It also assists in maintaining traction on slippery
surfaces.
It does so by regula ...