See also:

Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting upright and well back in the seat: 1. Pull the seat belt out slowly. 2. Insert the latch plate into the buckle, then tug ...

Low Beam Headlights
Driver side 1. Remove the engine compartment cover. 2. Unlock the holding clips (B). Push up the tab, and remove the cover of the air intake duct and its upper part. Passenger side All mod ...

Jump Starting
Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's battery ...