Speed Dial
Up to 15 speed dial numbers can be stored per phone.
To store a speed dial number:
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then press .
- Repeat the procedure to select Speed Dial, then Add New.
3. Rotate to select a place to choose a number from, then press .
By Phonebook:
- Select a number from the linked cell phone’s imported phonebook.
By Call History:
- Select a number from the call history.
By Phone Number:
- Input the number manually.
4. When the speed dial is successfully stored, you are asked to create a voice tag for the number. Rotate to select Yes or No, then press .
5. Using the button, follow the prompts to say the name for the speed dial entry.
Speed Dial
You can use the audio preset buttons during a call to store a speed dial number: 1. Press and hold the desired audio preset button during a call. 2. The contact information for the active call will be stored for the corresponding speed dial. When a voice tag is stored, press the button to call the number using the voice tag.
To add a voice tag to a stored speed dial number
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then press .
- Repeat the procedure to select Speed Dial.
3. Select an existing speed dial entry.
4. Rotate to select Store Voice Tag, then press .
5. Using the button, follow the prompts to complete the voice tag.
To delete a voice tag
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then press .
- Repeat the procedure to select Speed Dial.
3. Select an existing speed dial entry.
4. Rotate to select Delete Voice Tag, then press .
- You will receive a confirmation message on the screen. Rotate to select Yes, then press .
Speed Dial
Avoid using duplicate voice tag. Avoid using “home” as a voice tag. It is easier for HFL to recognize a longer name. For example, use “John Smith” instead of “John.”
To delete a speed dial number
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then press .
- Repeat the procedure to select Speed Dial.
3. Select an existing speed dial entry.
4. Rotate to select Delete Speed Dial, then press .
- You will receive a confirmation message on the screen. Rotate to select Yes , then press .
See also:
Using HFL
HFL Buttons
(Pick-up) button: Press to go
directly to the Phone screen or to answer an
incoming call.
(Hang-up) button: Press to
end a call.
(Talk) button: Press to call
a n ...
Using the Keyless Access System
When you carry the keyless access remote,
you can lock/unlock the doors and open
the trunk.
You can lock/unlock the doors within a radius
of about 32 inches (80 cm) of the outside door
handle. ...
Floor Mats
The front floor mats hook over the floor
anchors, which keep the mats from sliding
forward. To remove the mats for cleaning,
turn the anchor knobs to the unlock position.
When reinstalling the mat ...