Using HFL
HFL Buttons

 (Pick-up) button: Press to go 
directly to the Phone screen or to answer an
incoming call.
 
 (Hang-up) button: Press to 
end a call.
 
 (Talk) button: Press to call 
a number with a stored voice tag.
 
 (Back) button: Press to 
cancel a command.
PHONE button: Press to go directly to the Phone screen.
Selector knob: Rotate 
 to select an 
item on the screen, then press 
 .
Bluetooth® HandsFreeLink
To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:
• U.S.: Visit www.acura.com/handsfreelink, or call
1-888-528-7876.
• Canada: Visit www.handsfreelink.ca, or call
1-888-528-7876.
Voice control tips
• Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphone.
• Press and release the 
 button when 
you want to
call a number using a stored voice tag. Speak
clearly and naturally after a beep.
• If the microphone picks up voices other than yours,
the command may be misinterpreted.
• To change the volume level, use the audio system's
volume knob or the remote audio controls on the
steering wheel.
HFL Status Display
The audio/information screen notifies you when there is an incoming call.

Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped. Only previously stored speed dial entries with voice tags can be called using voice commands while the vehicle is in motion.

Bluetooth® HandsFreeLink
Bluetooth® Wireless Technology
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.
HFL Status Display
The information that appears on the audio/ information screen varies between phone models. You can change the system language to English, French, or Spanish.
See also:
Auxiliary Input Jack
   Use the jack to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.
 - The audio system a ...
   
Passenger Airbag Off Indicator
   When the passenger airbag off
indicator comes on
The indicator comes on to alert you that the
passenger's front airbag has been turned off.
This occurs when the front passenger’s weight
sensors ...
   
Turn Signals
   
The turn signals can be used when the power
mode is in ON.
One-touch turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal in ...
   
