Audio System Basic Operation
To use the audio system function, the power mode must be in ACCESSORY or ON.
Use the selector knob or SETUP button to access some audio functions.
Press 
to switch between the
normal and
extended display for some functions.
Selector knob: Rotate left or right to scroll
through the available choices. Press
to set
your selection.
SETUP button: Press to select any mode such
as the RDS Information, Sound Settings,
Play Mode, Resume/Pause, or Adjust
Clock.
BACK button: Press to go back to the
previous display.
button: Press to change
the audio/
information screen brightness. The brightness
can be set differently for the day time and
night time.
Pressing the button switches the modes
between daytime and night time.
Adjust the brightness using 
.
Audio System Basic Operation
These indications are used to show how to operate
the selector knob.
Rotate to select.
Press to enter.
Press the MODE, 
,
,
or 
button on the
steering wheel to change any audio setting.
Setup Menu Items
- Audio/Information Screen
- Audio Remote Controls
- Adjusting the Sound
- Playing the AM/FM Radio
- Playing the XM® Radio*
- Playing a CD
- Playing an iPod®
- Playing Internet Radio
- Playing a USB Flash Drive
- Playing Bluetooth® Audio
- Wallpaper Setup
See also:
Turn Signals
The turn signals can be used when the power
mode is in ON.
One-touch turn signal
When you lightly push up or down and release
the turn signal lever, the exterior turn signals
and turn signal in ...
Winter Tires
If driving on snowy or frozen roads, mount all season marked M+S tires, snow
tires,
or tire chains; reduce speed; and maintain sufficient distance between vehicles
when
driving.
Be particularly ...
Seat Belt Inspection
Regularly check the condition of your seat belts as follows:
• Pull each belt out fully, and look for frays, cuts, burns, and wear.
• Check that the latches work smoothly and the belts retract e ...
