See also:

Remote Transmitter Care
Replacing the Button Battery If the indicator does not come on when the button is pressed, replace the battery. Battery type: CR2032 1. Remove the built-in key. 2. Remove the upper half by c ...

Phone Setup
To pair a cell phone (when there is no phone paired to the system) 1. Press the PHONE button or the   button. 2.Rotate   to select Yes, then press . 3. Make sure your phone is in s ...

Back-Up Light Bulbs
When replacing, use the following bulbs. Back-Up Light: 16 W 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2. Turn the socket to the left and remove it. ...