Wipers and Washers
The windshield wipers and washers can be used when the power mode is in ON.
MIST
The wipers run at high speed until you release the lever.
Wiper switch (OFF, INT, LO, HI)
Change the wiper switch setting according to the amount of rain.
Adjusting the delay
Turn the adjustment ring to adjust the wiper delay.
Washer
Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.
Wipers and Washers
NOTICE
Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
NOTICE
In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on. If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. When the vehicle speeds up, the wiper operation’s shortest delay setting and the LO setting become the same. Turn the washers off if no washer fluid comes out. The pump may get damaged. The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.
See also:
Tools
Types of Tools
Types of Tools ...
Installing a Child Seat with a Lap/Shoulder Seat Belt
1. Place the child seat on the vehicle seat.
2. Route the seat belt through the child seat
according to the seat maker's instructions,
and insert the latch plate into the buckle.
- Insert th ...
ABS (Anti-lock Brake System)
ABS
Helps prevent the wheels from locking up, and helps you retain steering
control by
pumping the brakes rapidly, much faster than you.
The electronic brake distribution (EBD) system, which is p ...