If the Keyless Access Remote Batter is Weak

If the beeper sounds, the To Start, Hold Remote Near Start Button message appears on the multi-information display, the indicator on the ENGINE START/ STOP button flashes, and the engine won’t start. Start the engine as follows.

1. Touch the center of the ENGINE START/

1. Touch the center of the ENGINE START/ STOP button with the A logo on the keyless access remote while the indicator on the ENGINE START/STOP button is flashing.

The buttons on the keyless access remote should be facing you.
- The indicator flashes for about 30 seconds.

2. Depress the brake pedal and press the

2. Depress the brake pedal and press the ENGINE START/STOP button within 10 seconds after the beeper sounds while the indicator stays on.
- If you don’t depress the pedal, the mode will change to ACCESSORY.

    See also:

    Rear Defogger/Heated Door Mirror Button
    Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the power mode is in ON. The rear defogger and heated door mirrors automatically switch off after ...

    Side Airbag Off Indicator
    ■ When the side airbag off indicator comes on This indicator comes on if the passenger’s side airbag has been turned off because the passenger is too small to be sitting in the front se ...

    Exhaust Gas Hazard
    Carbon Monoxide Gas The engine exhaust from this vehicle contains carbon monoxide, a colorless, odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon monoxide gas ...