Getting Ready to Replace the Flat Tire

1. Open the trunk floor lid.

1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take the jack and wheel nut wrench out of the tool case.
3. Unscrew the wing bolt, and remove the spacer cone. Then, remove the spare tire.
4. Place a wheel block or rock in front and rear of the wheel diagonal to the flat tire.

5. Place the compact spare tire (wheel side up)

5. Place the compact spare tire (wheel side up) under the vehicle body, near the tire that needs to be replaced.

The shape of the tool case varies by model.

6. Loosen each wheel nut about one turn

6. Loosen each wheel nut about one turn using the wheel nut wrench.

    See also:

    Emergency Towing
    Call a professional towing service if you need to tow your vehicle. Flat bed equipment The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. Wheel ...

    Console Compartment
    Pull the handle to open the console compartment. To use the console lid as an armrest, slide it to the desired position while pulling up the release lever. You can keep beverage bottles and ...

    Automatic Lighting Off Feature
    The headlights, all other exterior lights, and the instrument panel lights turn off 15 seconds after you set the power mode to VEHICLE OFF (LOCK), take the remote with you, and close the driver's ...