Shift Lever Operation

NOTICE

NOTICE

When you change the shift lever from and to vice versa, come to a complete stop and keep the and vice versa, come to a complete stop and keep the brake pedal depressed.

Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.

Use the shift lever position indicator to check the lever position before pulling away.

If the transmission indicator blinks when driving, in any shift position, there is a problem with the transmission.

Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.

The fuel supply may be cut off if you drive at engine speeds in or over the tachometer’s red zone (engine speed limit). If this happens, you may experience a slight jolt.

When the engine speed is increased while the shift lever is in or, , the fuel supply may be cut or off even without the engine speed entering the, the fuel supply may be cut off even without the engine speed entering the tachometer’s red zone.

It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down.

Depress the brake pedal first.

    See also:

    Receiving a Call
    Press the button to answer the call, or the button to hang up. When there is an incoming call, a call notification (if activated) sounds and a message appears on the display. Call Waiting ...

    Safe Driving
    ...

    About Your Seat Belts
    Seat belts are the single most effective safety device because they keep you connected to the vehicle so that you can take advantage of many built-in safety features. They also help keep you from be ...