Preset Memory

To store a station:

Interface Dial

1. Tune to the selected station.
2. Press the MENU button.
3. Rotate Preset, then press .to select Save Preset, then press 4. Rotate to select the preset.
4. Rotate number you want to store that station, then pressto select the preset number you want to store that station, then press .

You can also store that station by the following procedure.

1. Tune to the selected station.
2. Rotate number you want to store the station.to select the preset number you want to store the station.
3. Press and hold seconds. for a few seconds.

On Demand Multi-Use DisplayTM

1. Tune to the selected station.
2. Select More.
3. Select Save Preset.
4. Select the preset number you want to store that station.

You can also store that station by the following procedure.

1. Tune to the selected station.
2. Change the display to the preset screen.
3. Select and hold the preset number you want to store that station.

You can store 12 XM® stations into the preset memory.

    See also:

    Wipers and Washers
    ■Front Wiper/Washer The windshield wipers and washers can be used when the ignition switch is in ON . ■ MIST The wipers run at high speed until you release the lever. ■ ...

    Inspecting and Changing Fuses
    1. Set the power mode to VEHICLE OFF (LOCK). Turn headlights and all accessories off. 2. Remove the fuse box cover. 3. Check the large fuse in the engine compartment. - If the fuse is blown, u ...

    Side Airbags
    The side airbags help protect the upper torso of the driver or a front passenger during a moderate to severe side impact. ■Housing Locations The side airbags are housed in the outside ed ...