Audio System Theft Protection

The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.

■ Reactivating the audio system
1. Set the power mode to ON, and turn on the audio system.
- If you set the power mode to ACCESSORY, you will be requested to enter the audio security code. See step 3.
2. Press and hold the power button again for more than two seconds.
- The audio system is reactivated when the system’s control unit recognizes that the system is in your vehicle.
If the control unit fails to recognize, Enter PIN Code appears on the audio/ information screen.

3. Enter the audio security code using the On Demand Multi-Use DisplayTM. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.

Find the audio system’s security code and serial number label in your owner’s manual kit.

We recommend that you write down the serial number, but not the security code, in this owner’s manual.

Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code.

You can find out about your serial number and security code from a dealer.

U.S. models

You can register the security code at Acura Owners (owners.acura.com.), and find information on how to retrieve the serial number and obtain the code at radio-navicode.acura.com.

    See also:

    To Set Up a Text Message Notice Option
    1. Press the PHONE button or the button. 2. Rotate   to select Phone Setup, then press . 3. Rotate to select Message Notice, then press . 4. Rotate to select a mode you want, ...

    Playing XM® Radio
    ...

    Engine Compartment Cover
    The component parts in the engine compartment are protected by a cover. You may need to remove the cover when you perform certain maintenance work. To remove the cover: Engine Compartment Cover ...