Front Seat Heaters*

The power mode must be in ON to use the

The power mode must be in ON to use the seat heaters. The HI setting heats the seats faster than the LO setting.

Press the seat heater button:

Press the seat heater button:

Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)> Three times - The LO setting> Four times - The OFF setting (no indicators on)

When a comfortable temperature is reached while using the seat heaters in HI, select MID or LO to keep the seat warm.

WARNING

Heat induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.

Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.

    See also:

    Important Safety Precautions
    Always wear your seat belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped ...

    Shift Lever Operation
    NOTICE When you change the shift lever from to and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a compl ...

    Fuse Locations
    If any electrical devices are not working, turn the ignition switch to LOCK (0 and check to see if any applicable fuse is blown. ■Engine Compartment Fuse Box Located near the brake fluid ...