Brightness Control

When the power mode is in ON, you can use

When the power mode is in ON, you can use thebutton to adjust instrument or panel brightness. button to adjust instrument panel brightness.

To brighten: Press the button. button.

To dim: Press the button.

You will hear a beep when the brightness reaches minimum or maximum. The multiinformation display will return to its original state several seconds after you adjust the brightness.

■ Brightness level indicator

■ Brightness level indicator
The brightness level is shown on the multiinformation display while you are adjusting it.

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

When it is bright outside and the headlight integration with the wiper is activated, the instrument panel brightness does not change.

Pushing or rolling the right selector wheel switches the display.

If you press the brightness display button until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the parking lights are on.

The brightness can be set differently for when the exterior lights are on, and when they are off.

    See also:

    USB Port
    Install the iPod® dock connector or the USB flash drive to the USB port. • Do not leave the iPod® or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it. • ...

    Locking/Unlocking the Doors Using a Key
    Fully insert the key and turn it. Locking/Unlocking the Doors Using a Key When you lock the driver's door with a key, all the other doors lock at the same time. When unlocking, the driver's door ...

    Fog Lights*
    When the low beam headlights are on, turn the fog light switch on to use the fog lights. Fog Lights The fog lights go off when the headlights turn off, or when the daytime running lights are on. ...