Automatic Intermittent Wipers*

When you push the lever down to AUTO, the

When you push the lever down to AUTO, the windshield wipers sweep once, and go into the automatic mode.

The wipers operate intermittently, at low speed, or at high speed and stops in accordance with the amount of rainfall the rainfall sensor detects.

■ AUTO sensitivity adjustment
When in AUTO, you can also adjust the rainfall sensor sensitivity using the adjustment ring

Sensor sensitivity

If the wiper stops operating due to any obstacle such

If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place.

Rotate the wiper switch to OFF, and set the power mode to ACCESSORY or VEHICLE OFF (LOCK), then remove the obstacle.

The rainfall sensor is in the location shown below.

Do not put the wiper lever in AUTO when cleaning

Do not put the wiper lever in AUTO when cleaning the windshield or driving through a car wash. If the wiper lever is in AUTO, and the power mode is in ON, the rainfall sensor may respond to your hand or car wash liquids, and the wipers may operate automatically.

    See also:

    Playing the XMВ® Radio
    ...

    Refilling Window Washer Fluid
    If the washer fluid is low, a message appears on the multi-information display. Pour the washer fluid carefully. Do not overflow the reservoir. NOTICE Do not use engine antifreeze or a vinegar/ ...

    Automatic Lighting Control
    Automatic lighting control can be used when the power mode is in ON. When the light switch is in AUTO, the headlights and other exterior lights will switch on and off automatically depending o ...