Multi-Information Display

The multi-information display shows the odometer, trip meter, outside temperature indicator, and other gauges. It also displays important messages such as warnings and other helpful information.

■Switching the Display

Roll the right selector wheel or press the TRIP button to change the display.

Models with navigation system

Models with navigation system

Models with navigation system

Models with navigation system

Models with navigation system

Models without navigation system

Models without navigation system

■Odometer

■Odometer

Shows the total number of miles or kilometers that your vehicle has accumulated.

■Trip Meter

Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure two separate trips.

■ Resetting a trip meter
To reset a trip meter, display it, then press and hold the TRIP button. The trip meter is reset to 0.0.

Switch between trip meter A and trip meter B by pressing the TRIP button.

■Outside Temperature

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

■ Adjusting the outside temperature display
Adjust the temperature reading up to ± 5°F (U.S.) or ± 3°C (Canada) if the temperature reading seems incorrect.

The temperature sensor is in the front bumper.

Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be updated after the temperature reading has stabilized.

Use the multi-information display’s customized features to correct the temperature.

■Average Fuel Economy

Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.

You can change when to reset the average fuel economy.

■Instant Fuel Economy

Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).

■Range

Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.

■Elapsed Time

Shows the time elapsed since the last time Trip A or Trip B was reset.

You can change when to reset the elapsed time.

■Average Speed

Shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A or Trip B was reset.

You can change when to reset the average speed.

■Current Mode for ACC with LSF

Models with ACC with LSF

Shows the current mode for ACC with LSF.

■Turn-by-Turn Directions

Models with navigation system

Shows you turn-by-turn driving directions to your destination linked with the navigation system.

You can select whether the turn-by-turn display comes on or not during the route guidance.

■Engine Oil Life

Shows the remaining oil life and Maintenance MinderTM.

■Tire Pressure Monitor

Shows each tire’s pressure.

■Customized Features

Use the multi-information display to customize certain features.

■ How to customize
Select the Vehicle Settings screen by rolling the right selector wheel while the power mode is in ON, and the vehicle is at a complete stop.

Push the right selector wheel.

To customize other features, roll the right selector

To customize other features, roll the right selector wheel.

Customization is possible when you see the driver’s ID (Driver 1 or Driver 2) on the screen.

The driver’s ID indicates which remote transmitter you have used to unlock the driver’s door. The customized settings are recalled every time you unlock the driver’s door with that remote.

When you customize settings: Shift to (P.

Customizing is also available from the audio/ information screen.

You cannot have Vehicle Settings displayed on the multi-information display while the audio/ information screen shows the same menu.

■ Customization flow
Roll the right selector wheel to select Vehicle Settings and push the right selector wheel.

■ List of customizable options

■ List of customizable options

*1:Default Setting

*1:Default Setting

■ Example of customization settings

■ Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Refueled are shown below. The default setting for “Trip A” Reset Timing is Manually Reset.

1. Roll the right selector wheel to select

1. Roll the right selector wheel to select Vehicle Settings, then push the right selector wheel.

2. Roll the right selector wheel until Meter

2. Roll the right selector wheel until Meter Setup appears on the display.
3. Push the right selector wheel.
- Language Selection appears first on the display.

4. Roll the right selector wheel until “Trip A”

4. Roll the right selector wheel until “Trip A” Reset Timing appears on the display, then push the right selector wheel.
- The display switches to the customization setup screen, where you can select When Refueled, IGN Off, Manually Reset, or Exit.

5. Roll the right selector wheel and select

5. Roll the right selector wheel and select When Refueled, then push the right selector wheel.
- The When Refueled Setup screen appears, then the display returns to the customization menu screen.

6. Roll the right selector wheel until Exit

6. Roll the right selector wheel until Exit appears on the display, then push the right selector wheel.
7. Repeat Step 6 until you return to the normal screen.

    See also:

    Using the Remote Transmitter
    Press the trunk release button for approximately one second to unlock and open the trunk. ...

    Using the Trunk Release Switch
    Push up the release switch on the trunk lid after the doors are unlocked. ...

    Precautions While Driving
    ■In Rain Avoid driving in deep water and on flooded roads. This can damage the engine, driveline, or cause electrical component failure. NOTICE Do not operate the shift lever while pressing ...