Installing a Child Seat with a Lap/Shoulder Seat Belt

1. Place the child seat on the vehicle seat.

1. Place the child seat on the vehicle seat.
2. Route the seat belt through the child seat according to the seat maker’s instructions, and insert the latch plate into the buckle.
- Insert the latch plate fully until it clicks.

3. Slowly pull the shoulder part of the belt all

3. Slowly pull the shoulder part of the belt all the way out until it stops. This activates the lockable retractor.
4. Let the seat belt completely wind up into the retractor, then try to pull it out to make sure the retractor is locked.
- If you are able to pull the shoulder belt out, the lockable retractor is not activated. Pull the seat belt all the way out, and repeat steps 3 – 4.

5. Grab the shoulder part of the seat belt near

5. Grab the shoulder part of the seat belt near the buckle, and pull up to remove any slack from the lap part of the belt.
- When doing this, place your weight on the child seat and push it into the vehicle seat.

A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.

6. Make sure the child seat is firmly secured by

6. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.
7. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.

    See also:

    XM® Radio Service*
    Subscribing to XM® Radio 1. You need your radio ID ready before registering for subscription. To see the ID in the display: Turn the selector knob until 0 appears. 2. Have your radio ID and cred ...

    Opening the Hood
    1. Park the vehicle on a level surface, and set the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard.  - The hood will pop up slightly. 3. Sli ...

    Tire and Loading Information Label
    The label attached to the driver’s doorjamb provides necessary tire and loading information. The tire and loading information label attached to the driver’s doorjamb contains: 1 The number o ...