Shift Lever Does Not Move

Automatic transmission models

Follow the procedure below if you cannot move the shift lever out of the position. position.

■Releasing the Lock

1. Set the parking brake.

1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flattip screwdriver. Put it into the shift lock release slot as shown in the image, and remove the cover.

4. Insert the key into the shift lock release slot.

4. Insert the key into the shift lock release slot.
5. While pushing on the key down, press the shift lever release button and place the shift lever into - The lock is now released. Have the shift.
- The lock is now released. Have the shift lever checked by a dealer as soon as possible.

    See also:

    Parking Brake
    Use the parking brake to keep the vehicle stationary when parking To apply: Pull the lever fully up without pressing the release button. To release: 1. Pull the lever slightly, and press and ...

    To Set the Vehicle Speed
    Take your foot off the pedal and press the RES/+/SET/– switch down when you reach the desired speed. The moment you release the RES/+/SET/– switch, the set speed is fixed, and cruise cont ...

    Parking Sensor System*
    The corner and center sensors monitor obstacles behind your vehicle, and the beeper and audio/information screen let you know the approximate distance between your vehicle and the obstacle. σ ...