Parking Brake

Use the parking brake to keep the vehicle stationary when parking

To apply:

To apply:
Pull the lever fully up without pressing the release button.

To release:

To release:
1. Pull the lever slightly, and press and hold the release button.
2. Lower the lever down all the way, then release the button.

NOTICE

Release the parking brake fully before driving. The rear brakes and axle can be damaged if you drive with the parking brake applied.

If you start driving without fully releasing the parking brake, a buzzer sounds as a warning, and RELEASE PARKING BRAKE appears on the multi-information display.

Always apply the parking brake when parking.

    See also:

    How to Select a Play Mode
    You can select scan, repeat, and random modes when playing a track. Interface Dial 1. Press the MENU button. 2. Rotate to select Scan or Random/ Repeat, then press 3. Rotate to select a mod ...

    SRS (Supplemental Restraint System) Indicator
    When the power mode is set to ON The indicator comes on for a few seconds, then goes off. This tells you the system is working properly. If the indicator comes on at any other time, or does not ...

    Automatic Seat Belt Tensioners
    The front seats are equipped with automatic seat belt tensioners to enhance safety. The tensioners automatically tighten the front seat belts during a moderate-tosevere frontal collision, sometime ...