USB Adapter Cable

1. Unclip the USB connector and loosen the

1. Unclip the USB connector and loosen the adapter cable.
2. Connect the iPod® dock connector or the USB flash drive to the USB connector.

• Do not leave the iPod® or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.
• Do not use an extension cable with the USB adapter cable.
• Do not connect the iPod® or USB flash drive using a hub.
• Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged.
• We recommend backing up your data before using the device in your vehicle.
• Displayed messages may vary depending on the device model and software version.

If the audio system does not recognize the iPod®, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturer’s instructions provided with the iPod® or visit www.apple.com/ ipod.

    See also:

    Adjusting the Sound
    Press the SETUP button, and rotate to select Sound Settings, then press . Rotate to scroll through the following choices: Adjusting the Sound The SVC has four modes: Off, Low, Mid, and ...

    Help Features
    • To hear general HFL information and help, say “Tutorial.” • Say “Hands free help” or “Help” any time to get help or hear a list of commands. Bluetooth® Wireless Technology The ...

    How to Set Up the Jack
    1. Place the jack under the jacking point closest to the tire to be changed. 2. Turn the end bracket (as shown in the image) clockwise until the top of the jack contacts the jacking point. - ...