Recalling the Stored Position

Automatic transmission models

Automatic transmission models

1. Move the shift lever to All models.

All models

2. Apply the parking brake.
3. Press a memory button (1 or 2).
- You will hear the beeper, and the indicator light will blink.

The seat will automatically move to the memorized position. When it has finished moving, you will hear the beeper, and the indicator light stays on.The seat will stop moving if you: • Press the SET button, or a memory button (1 or 2).
• Adjust the seat position.

Automatic transmission models

• Shift into any position except Manual transmission mo.

Manual transmission mo

• Release the parking brake.

    See also:

    Valet Key
    Can be used to start and stop the engine, and lock and unlock driver’s door. When you need to leave a key with a third party, leave the valet key. ...

    Starting the Engine
    1. Make sure the parking brake is applied. Automatic transmission models 2. Check that the shift lever is in , then depress the brake pedal.  - Although it is possible to start the vehic ...

    Front Turn Signal Light Bulbs
    When replacing, use the following bulbs. Front Turn Signal Light: 21 W 1.Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger side: Turn the steering ...