Manual Operation

Rotating the light switch turns the lights on

Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.

■ High beams
Push the lever forward until you hear a click.

■ Low beams
When in high beams, pull the lever back to return to low beams.

■ Flashing the high beams
Pull the lever back, and release it.

If you remove the key from the ignition switch while the light is on, a chime sounds when the driver’s door is opened.

Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs.

If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

    See also:

    Automatic Transmission
    Creeping The following conditions cause the engine to run at high revolutions, and increase creeping: • Immediately after the engine starts. • When the climate control system is in use. Keep ...

    If the Low Oil Pressure Indicator Comes On
    Reasons for the indicator to come on Comes on when the engine oil pressure is low. What to do as soon as the indicator comes on 1.Immediately park the vehicle in a safe place. 2. If necessary, t ...

    Battery
    Checking the Battery Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion. If your vehicle’s battery is disconnected or goes dead: • ...