Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure 2 separate trips.

■ Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to 0.0.

Switch between trip meter A and trip meter B by pressing the SEL/RESET button.

Outside Temperature

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

■ Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.

The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be updated after the temperature reading has stabilized.

Use the multi-information display’s customized features to correct the temperature.

■Instant Fuel Economy

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

■Average Fuel Economy

Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.

You can change whether to reset the average fuel economy.

■Range

Shows the estimated distance you can travel on the fuel remaining. This distance is estimated from the fuel economy of your trips in the past.

■Elapsed Time

The elapsed time display shows the time during one drive cycle.

You can change when to reset the elapsed time.

■Average Speed

The display shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A was reset.

■Engine Oil Life

Shows the remaining oil life and Maintenance MinderTM.

■Tire Pressure Monitor

Shows each tire’s pressure.

■Bluetooth® HandsFreeLink®

Shows your paired cell phone’s information.