Remote Transmitter Care

Replacing the Button Battery

If the indicator does not come on when the button is pressed, replace the battery.

Battery type: CR2032

1. Remove the built-in key.

1. Remove the built-in key.

2. Remove the upper half by carefully prying

2. Remove the upper half by carefully prying on the edge with a coin.

 - Wrap a coin with a cloth to prevent scratching the transmitter.

3.Make sure to replace the battery with the correct polarity.

Replacing the Button Battery

NOTICE

An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal. Replacement batteries are commercially available or at a dealer.

    See also:

    Features
    This chapter describes how to operate technology features on models without the navigation system. ...

    Emergency Engine Stop
    If you cannot stop the engine by pressing the ENGINE START/STOP button, do either of the following operations: • Press and hold the ENGINE START/STOP button for three seconds. • Firmly press th ...

    Emissions Testing
    Testing of Readiness Codes Your vehicle uses “readiness codes,” as part of its onboard self diagnostic system. Some states refer to these codes during testing to see if your vehicle's emis ...